NEW! Lighting and Housing Connection LCS 75 PRO with strain relief
Our LCS 75 lighting connector has become a successful alternative for connecting luminaires and housings up to protection class IP66:
3 times faster than the conventional connection with cable gland and internal lighting connector
significantly cheaper than plug and socket connectors with a corresponding protection rating
By introducing the new LCS 75 PRO we can significantly expand the range of applications for this connection solution (protected as utility model).
With the LCS 75 PRO, we can now also equip luminaires that require a strain relief. This is usually required when using fine-stranded resp. flexible connection cables. For this purpose, we have replaced the sleeve with a strain-relieving cable gland and a separate flat seal.
The holding force of the strain relief exceeds 120 N and therefore fulfils the requirements of the EN 60598 luminaire standard.
We achieve IP66/67/68 protection with the cable gland, i.e. the LCS 75 PRO can be used not only for IP66 luminaires, but also for IP67 and IP68 applications (dustproof and water-proof).
Areas of application for this are e.g:
High-Bay luminaires
lights for industrial halls
luminaires for underground car parks
The panel mount terminal block built into the housing is the same as in our current LCS 75, which has the advantage that the luminaires equipped with the current LCS 75 can be fitted with a strain relief without any design changes.
A special feature are the two so-called anti-logging grooves on the screw connection. These ensure that no water remains on the seal for a long time after a downpour, even in a vertical installation position, but runs off through these grooves. Water on the seal would inevitably penetrate the luminaire sooner or later.
Watch our new video to see how the LCS 75 and LCS 75 PRO are used:
LCS 75 and LCS 75 PRO – Connection of IP66/IP67/IP68 water-proof luminaries
This way to the product range overview: Lighting and Housing Connection IP66/IP67/IP68
By introducing the new LCS 75 PRO we can significantly expand the range of applications for this connection solution (protected as utility model).
Products
With the LCS 75 PRO, we can now also equip luminaires that require a strain relief. This is usually required when using fine-stranded resp. flexible connection cables. For this purpose, we have replaced the sleeve with a strain-relieving cable gland and a separate flat seal.
The holding force of the strain relief exceeds 120 N and therefore fulfils the requirements of the EN 60598 luminaire standard.
Application areas
We achieve IP66/67/68 protection with the cable gland, i.e. the LCS 75 PRO can be used not only for IP66 luminaires, but also for IP67 and IP68 applications (dustproof and water-proof).
Areas of application for this are e.g:
The panel mount terminal block built into the housing is the same as in our current LCS 75, which has the advantage that the luminaires equipped with the current LCS 75 can be fitted with a strain relief without any design changes.
Special feature
A special feature are the two so-called anti-logging grooves on the screw connection. These ensure that no water remains on the seal for a long time after a downpour, even in a vertical installation position, but runs off through these grooves. Water on the seal would inevitably penetrate the luminaire sooner or later.
Application video
Watch our new video to see how the LCS 75 and LCS 75 PRO are used:
LCS 75 and LCS 75 PRO – Connection of IP66/IP67/IP68 water-proof luminaries
Further information
This way to the product range overview: Lighting and Housing Connection IP66/IP67/IP68